Page 1 of 1
TDS readings.
Posted: Sun Aug 15, 2004 2:05 pm
by Snakeman
I check my RO water with the TDS meter and it showed 1ppm. My tap water showed 49ppm. How high do you let it get before you replace the Ro filters?
Posted: Sun Aug 15, 2004 2:11 pm
by snoopdog
1ppm can just be a slightly dirty bucket. 1ppm is not shit for changing, maybe if it gets up to 10ppm.
Posted: Sun Aug 15, 2004 2:17 pm
by Snakeman
good.
Posted: Sun Aug 15, 2004 11:04 pm
by Brandon
was reading a thread the other day on rc, that's a really good tds reading for tap water. A lot of the peoples readings were in the 600-800 range.
Posted: Sun Aug 15, 2004 11:10 pm
by snoopdog
My tap here is in the 170 range.
Posted: Sun Aug 15, 2004 11:15 pm
by andy4499
Posted: Mon Aug 16, 2004 7:00 am
by ShagMan
My tap is about 60ppm too, pretty good.
Jason, yeah, your RO/DI water is OK up to 7-10ppm... I get about 1ppm usually even with a totally fresh set of filters.
Posted: Mon Aug 16, 2004 9:02 pm
by snoopdog
Got mine from
www.airwaterice.com and never looked back.