Float switch.

Snakeman · Post by **Snakeman** » Mon Sep 29, 2003 8:40 pm

I am thinking about hooking up some float switches on my top off water, What do I need to know when I start to do my shopping. I'm going to be running my RO water line strait to my sump.

ShagMan · Post by **ShagMan** » Mon Sep 29, 2003 8:43 pm

Liz and myself both use Kent's float switch right onto the RO/DI output line, empties right into the sump, works like a champ. Beware, your RO/DI water quality won't be as good. When I say not as good, I'm talking like you'll have 3ppm TDS instead of 0ppm (I tested it one day). It's not much, but I know some people are very "attentive" to things like that.

Snakeman · Post by **Snakeman** » Mon Sep 29, 2003 8:46 pm

What? What is that and why does a float switch cause you to get that.

ShagMan · Post by **ShagMan** » Mon Sep 29, 2003 9:01 pm

The float switch makes your RO/DI kick out very small amounts of water, repeatedly. When you first start your RO/DI, it puts out a slightly lower quality water... I mean VERY slightly.... but anyway, you see what I mean. I tested a glass full of RO/DI, and got a reading of 3 on my TDS meter, however, when I filled a 3" deep POOL of water in the 240G (about 40 gallons?) and when I tested that large batch of water, I got 0 on the TDS meter.

Scott · Post by **Scott** » Mon Sep 29, 2003 9:02 pm

Each time the float valve gets to a cetain level it will start to run. When it starts to run the pressure is too low for the membrane to efficiently filter the water. When you have it in your sump the float valve is opening and closing many times a day, each time you get the small amount of mostly unfiltered water.

ShagMan · Post by **ShagMan** » Mon Sep 29, 2003 9:05 pm

Yep. Just *how* unfiltered is up to debate, at least I have not read anything solid that says "you're getting crap if you do it this way" ... but it's definitely something to think about. I know that I could definitely tell the difference with a TDS meter. Having said that, 3ppm isn't enough for me to worry about (from my poor test).

Snakeman · Post by **Snakeman** » Mon Sep 29, 2003 9:09 pm

My RO filter has a 3 gallon reservoir. So I would think that the water would be coming from there not directly from the filter.

Scott · Post by **Scott** » Mon Sep 29, 2003 9:11 pm

No, it's not really an issue. Things that are measured by a TDS meter may be removed by carbon, skimming, biological processed, and some will be removed during water changes. The only way I see it being a problem is if there was an abnormally large amount of copper in your water, which is pretty unlikely.

Think of how many people out there have successful reef tanks and I would guess that half probably use RO water directly from their RO units. Evin if it was only a quarter that is still a lot of people.

Snakeman · Post by **Snakeman** » Mon Sep 29, 2003 9:20 pm

What do the other 75% use?

Xster · Post by **Xster** » Mon Sep 29, 2003 9:22 pm

I have mine hooked straight to the sump. I haven't tested it out yet, but everything seems fine. Maybe I need to re-consider that setup.

Scott · Post by **Scott** » Mon Sep 29, 2003 9:23 pm

Buckets of water like I do?

Snakeman · Post by **Snakeman** » Mon Sep 29, 2003 9:30 pm

the reservoir on my Ro filter hold 3 gals so maybe that will help. Hey it's still better than tap water. Any brands better that others? WHat do you do to safe guard againt snail from turning them on. Thanks for the info.

Brandon · Post by **Brandon** » Mon Sep 29, 2003 9:30 pm

I make a trashcan full, let it set with a pump for a couple of days. Siphon an equal amount out of the house into another trashcan, then use a pump in the newly made up water to push it into the house in the sump... or uhm.. I just pour the buckets down the toilet and fill and equal amount from the newly made up water outside.

Scott · Post by **Scott** » Mon Sep 29, 2003 9:33 pm

I make a toilet full, let it set with a pump for a couple of days. Siphon an equal amount out of the house into another toilet, then use a pump in the newly made up water to push it into the house in the sump... or uhm.. I just pour the buckets in a trashcan and fill and equal amount from the newly made up water outside.

ShagMan · Post by **ShagMan** » Mon Sep 29, 2003 9:33 pm

Snakeman wrote:WHat do you do to safe guard againt snail from turning them on.

My float's in the sump, no snails there. I like Kent, holds up to the pressure and easy to install/adjust/clean.