240 Gallon

Post by **snoopdog** » Wed Jun 25, 2003 5:21 pm

Ok here is the scoop on the tank, i went and looked at it today. It's 2' x 2' x 8' and with two center braces. The tank was upside down and dirty so could not tell scratches very well. The back for sure had scratches, Rich said that is why the guy wanted to get rid of it was he needed the tank to be viewable from both sides. The glass that would be the front had either an imperfection or a chip in at at the very bottom maybe 3/8 of an inch circular and maybe 1/16 of an inch deep. Just so when you ran your finger over it you could feel it. This was at the bottom close to the seam. The tank had been resealed and it still felt fresh, not a great job though, kinda messy if you ask me. It had side overflow boxes but in the middle on both sides against the side glass. The chip in the glass bothered me some, as did not being able to see for scratches.

So here it is PROS

Cheap $400.00 and it is here now.

CONS

Overflows instead of bulkheads
Already scratched
Crappy seam job
Not drilled for closed loop without extra cost.

But for the price of $400 instead of 1000+ what would you do.

Brandon · Post by **Brandon** » Wed Jun 25, 2003 5:32 pm

$600 is a lot of difference, but how much will your livestock & equipment be worth? If we're talking $1000's of dollars and many many hours of work put into this display, you're time is worth something.. why settle for somthing that you might never be satisfied with? Putting this into a wall is gonna take boocoo hours/dollars.. If you would be happy with this tank.. go for it , if it would bug you for years on down the road.. the 600 might be better spent for something you could be satisfied with.
Just my thoughts..

Scott · Post by **Scott** » Wed Jun 25, 2003 5:35 pm

Pass on it (at least I would). The way I see it:
1.The chip is at the bottom where water pressure would be the greatest. If someone bumped the tank or leaned against it what would the chances of that chip becoming a crack?
2. It is not exactly what you wanted.
3. If the seams that were poorly sealed leaked, you would have 240 gallons of water on your floor.
4. There were too many cons.

The only way I would buy it is if you could have the front glass replaced and the whole thing resealed for a VERY resonable price. Still it has overflows.

SaltnLime · Post by **SaltnLime** » Wed Jun 25, 2003 7:32 pm

If this is going to be the "one".......... yunno....the tank of your dreams and the focal point of your new home....I'd say get the one you want first time around. At then end of the day, you have got to look at the thousands of dollars you'll have wrapped up in a large tank......... the few hundred bucks you save in the beginning are not going to be what you will be thinking about a year from now when it's set up and you keep looking at the chip or scratches.

Also the center braces suck. More and more manufacturers are finding ways to eliminate them. They diffuse light, grow algae and are somtimes submersed at the waterline affecting top water motion.

JMO.

Post by **snoopdog** » Wed Jun 25, 2003 7:53 pm

I agree, i think i will pass on it. This will be "the tank" for some time to come, and i want it to be right. I think all of the things would bug the piss out of me. Reeferpuffer if you read this, lets pass on going to Rich's tomorrow. No sense in you running all the way down here. I was also thinking that Reefer said something that makes sense, i want a 6 foot tank, not 8 foot. 24 inch depth does seem really skinny.

reeferpuffer · Post by **reeferpuffer** » Wed Jun 25, 2003 10:54 pm

8 foot of tank is alot of tank, means more lighting..lighting is a b****. i say like a 6 foot long....30" width, and like maybe 30" tall...

Scott · Post by **Scott** » Sun Jun 29, 2003 11:42 am

Here is a link to a 180 gallon. It is with other stuff but you might be able to talk him into separating. It is in Destin and if you buy it you have to take me to go and get it.

http://reefcentral.com/forums/showthrea ... did=207303

SaltnLime · Post by **SaltnLime** » Sun Jun 29, 2003 3:27 pm

WOW! PLease buy it so I'm not tempted!

Post by **snoopdog** » Sun Jun 29, 2003 5:17 pm

I sent him a message.

Scott · Post by **Scott** » Sun Jun 29, 2003 7:25 pm

His name is Ken, I have talked to him a few times. He is a great guy. I hope that you can buy it, I have been trying to go see his system for 6 months.

Brandon · Post by **Brandon** » Sun Jun 29, 2003 10:00 pm

Just buy the whole setup, then you can setup a backyard greenhouse to propogate in

a 10' skimmer? Wow!

Post by **snoopdog** » Tue Jul 01, 2003 5:36 pm

This is what he replied

Hey reef crazed,
I will sell the 180 and 30 gal sump for $400 it has some small stracthes. give me a call at 850-376- 5496.

Ken

What do you think. It the "scratch" thing always isnt it ?

reeferpuffer · Post by **reeferpuffer** » Tue Jul 01, 2003 6:40 pm

go make a raod trip man, i think its a good deal and you'll be pleased..p.s..i saw the 240 gallon, im very glad you didnt get it, it sux

Post by **snoopdog** » Wed Jul 02, 2003 5:44 pm

I think i will pass. The next few weekends i will not be able to leave town. He will have it sold by then i think.

SaltnLime · Post by **SaltnLime** » Wed Jul 02, 2003 6:38 pm

snoopdog wrote:I think i will pass. The next few weekends i will not be able to leave town. He will have it sold by then i think.

If you don't mind then... I think I'll go have a look