Mobile Bay Reef Keepers

I have the ballast, but my wiring harness wires were cut too short for my canopy. Trying to avoid splicing a dozen wires....willing t o buy a wiring harness if anyone has one.

Well.... noone had a harness...and as luck would have it...noone at 5:30 pm on Saturday sells 18 gauge single strand wire either....so the actinic project came to a grinding halt.....

A saturday wasted....... But hey...it was'nt the first one I've wasted.

Thanks to Scott for getting my wiring straight. I hope I can still use that harness.... It took scott like 2 seconds to figure the wiring out...stip off the useless spliced wires for the dimmer and get it hooked up....... the darn wires were just to short to mount in my canopy

I have 200 feet of red-coated 14awg single strand, and 100 feet of green-coated 14awg single strand, just what you need... have heat gun, soldering iron/solder, and heatwrap too!!! Call me.

ShagMan wrote:I have 200 feet of red-coated 14awg single strand, and 100 feet of green-coated 14awg single strand, just what you need... have heat gun, soldering iron/solder, and heatwrap too!!! Call me.

Well, I just put my canopy back on and turned on the lights. Put my ballast and lights in the garage. Figuresince I cant get it done today, might as well order a wiring harness with good, long wires and be donw with it......I really wanted some blue light on there today though

Patience Danielson.........

good luck, i couldnt find a new harness