110 gallon project
Moderator: snoopdog
- 110chadman
- Copepod
- Posts: 348
- Joined: Thu Apr 10, 2003 4:57 pm
- Location: pensacola florida
- Contact:
110 gallon project
well since i moved in to the new house ive been itching to get things rolling on the tank setup i posted some pics back when i lived in the apartment bu now that i have a fish/storage room ive been working planning and thinking alot on what i want to do
here are some pics of the progress
ill be adding another shelf bench and storage unit where the large toolbox is and i still have to do more wireing for the calk reactor and the lights that are in the living room
thanks
chad
here are some pics of the progress
ill be adding another shelf bench and storage unit where the large toolbox is and i still have to do more wireing for the calk reactor and the lights that are in the living room
thanks
chad
- Attachments
-
- beckett etss skimmer mod
- beckettskimmod.JPG (71.57 KiB) Viewed 14808 times
-
- calk reactor on sump stand
- calk.JPG (82.74 KiB) Viewed 14809 times
-
- main skimmer and cloosed loop pumps pluged in
- plugedin.JPG (57.08 KiB) Viewed 14809 times
-
- pre wiring befor installing
- prewire.JPG (86.74 KiB) Viewed 14808 times
-
- l-r cloosed loop pump skimmer pump main return
- pumps.JPG (75.6 KiB) Viewed 14808 times
-
- building of the sump work bench and storage shelf
- sumpbenchstorage2.JPG (56.38 KiB) Viewed 14808 times
-
- goodies going back on the shelves
- sumpbenchstorage3.JPG (77.77 KiB) Viewed 14809 times
-
- all the crap that had to come out and go back in
- allthecrap.JPG (82.2 KiB) Viewed 14808 times
gitting things back in order and starting over!!!
- 110chadman
- Copepod
- Posts: 348
- Joined: Thu Apr 10, 2003 4:57 pm
- Location: pensacola florida
- Contact:
110 gallon corner tank
my plan is build one more shelf/storage unit to house mor fish items on the bottom and move the tool box to the other side of the room finish off the electrical then move on to the plumbing and then finish the skin for the stand an canopy ( will make it easer to work on with out the skin
i figure maby by january ill have saltwater in then sand then my rock then som fish if all goes well !!!!
andy was buy yesterday and dropped off the float valves (thanks again andy) those will go into the sump and topoff water container
ive still got lost to do but being x mas time and we will be going out tof town i wont have a lot of time to work on the tank and id like for my family and extended family to have a nice xmas holiday due to all things that have happened in the last few months so i wont bee that greedy!!!!! on the tank and myself ill post pics and updates as the time progresses so keep an eye out on this
thanks for all that have looked
chad
my plan is build one more shelf/storage unit to house mor fish items on the bottom and move the tool box to the other side of the room finish off the electrical then move on to the plumbing and then finish the skin for the stand an canopy ( will make it easer to work on with out the skin
i figure maby by january ill have saltwater in then sand then my rock then som fish if all goes well !!!!
andy was buy yesterday and dropped off the float valves (thanks again andy) those will go into the sump and topoff water container
ive still got lost to do but being x mas time and we will be going out tof town i wont have a lot of time to work on the tank and id like for my family and extended family to have a nice xmas holiday due to all things that have happened in the last few months so i wont bee that greedy!!!!! on the tank and myself ill post pics and updates as the time progresses so keep an eye out on this
thanks for all that have looked
chad
gitting things back in order and starting over!!!
- 110chadman
- Copepod
- Posts: 348
- Joined: Thu Apr 10, 2003 4:57 pm
- Location: pensacola florida
- Contact:
got some more pics of the 110 gallon project for everyone hope you like
they are the plumbing up to the hole i cut in the wall i have to get the bulk heads in to go in the tank and then ill plumb it through the wall and tie it in to what i have done then ill pull it all apart and paint the sump bench i still have to get a new sump i just dont know what i want i have a friend that has a 75 that i can use but i think it may be too tall so i was thinking i might be able to go with a 55 or 60 long i dunno just yet ill get to it one of these days
here are some pics
chad
they are the plumbing up to the hole i cut in the wall i have to get the bulk heads in to go in the tank and then ill plumb it through the wall and tie it in to what i have done then ill pull it all apart and paint the sump bench i still have to get a new sump i just dont know what i want i have a friend that has a 75 that i can use but i think it may be too tall so i was thinking i might be able to go with a 55 or 60 long i dunno just yet ill get to it one of these days
here are some pics
chad
- Attachments
-
- plumbing2.JPG (71.49 KiB) Viewed 14700 times
-
- from out to inside the cloosed loop pump 1" skimmer pump 1/2" main return 1/2" its a 4mdqxsc 3mdqsc 3mdqsx pumps
- plumbing.JPG (69.18 KiB) Viewed 14700 times
-
- looking from the fish room into the the house where the plumbing will go
- holeinwall2.JPG (60.3 KiB) Viewed 14700 times
-
- inside the house looking into the fish room
- holeinwall.JPG (53.44 KiB) Viewed 14700 times
-
- looking down the sump bench
- plumbing3.JPG (66.41 KiB) Viewed 14702 times
gitting things back in order and starting over!!!
- 110chadman
- Copepod
- Posts: 348
- Joined: Thu Apr 10, 2003 4:57 pm
- Location: pensacola florida
- Contact:
well i wasnt to sure of how much room i would need im gonna come back later when its all done and make a nice wood panel over the hole or just het some sheet rock and mud it back on and make holes just for the pipes
the soon to be wife realy had no problem with i had told her thats how its goona have to be if she wanted the fishtank up and running
i think iv got a few more pics ill post up tonight
chad
the soon to be wife realy had no problem with i had told her thats how its goona have to be if she wanted the fishtank up and running
i think iv got a few more pics ill post up tonight
chad
gitting things back in order and starting over!!!
- 110chadman
- Copepod
- Posts: 348
- Joined: Thu Apr 10, 2003 4:57 pm
- Location: pensacola florida
- Contact: