holes

pheonixsoul25 · Post by **pheonixsoul25** » Wed Nov 02, 2011 8:42 pm

hey does anyone know what progressive charges to drill an tank ?? my over flow box broke and almost flooded my dinning room. moving next week so i have to break tank down any way might as well have drilled for over flow and for return .....

Fishfood · Post by **Fishfood** » Wed Nov 02, 2011 9:15 pm

It can't be too much and you will be happier when you get it drilled. My guess would be $10 to $15 but I could be way off.

pheonixsoul25 · Post by **pheonixsoul25** » Wed Nov 02, 2011 9:33 pm

Yeqh the overflow box was from a smaller tank and needs to be upgraded too only like 300 gph on my 65g gallon no were near what it needs to be lol

Buddy08 · Post by **Buddy08** » Wed Nov 02, 2011 10:53 pm

i have a drill bit for a 1 inch bulkhead fitting if you wanted to borrow it. all you have to have is plumbers putty, ductape, a high rpm drill, and water from the tap to do it. If you want to borrow it, send me a PM and we will figure something out

Innerarity Reefs · Post by **Innerarity Reefs** » Sat Nov 05, 2011 9:19 am

I drill tanks, $10 a hole. Never broke, cracked, or chipped one out of 30shape or so in the last 2 years.

pheonixsoul25 · Post by **pheonixsoul25** » Sat Nov 05, 2011 4:20 pm

Thanks guys I i rounded up all the stuff to do it with so I'm gonna give it a shot

Innerarity Reefs · Post by **Innerarity Reefs** » Sat Nov 05, 2011 5:12 pm

Good luck!

pheonixsoul25 · Post by **pheonixsoul25** » Sat Nov 05, 2011 8:46 pm

Lol thanks Tj !

holes

holes

Re: holes

Re: holes

Re: holes

Re: holes

Re: holes

Re: holes

Re: holes