48.5"x24.5" top and bottom bracing.
![Image](http://www.reefcrazed.com/albums/Anemone/Costruction_002.sized.jpg)
Takes some shape.
![Image](http://www.reefcrazed.com/albums/Anemone/Costruction_003.sized.jpg)
Triple braced uprisers, this cat will be strong.
![Image](http://www.reefcrazed.com/albums/Anemone/Costruction_005.sized.jpg)
Finished frame.
![Image](http://www.reefcrazed.com/albums/Anemone/Costruction_007.sized.jpg)
I hope to get the skin on tomorrow.
Joe
Moderator: snoopdog
Just use an adapter (bushing) from 3/4 to 1 or larger. The increased pipe diameter reduces head pressure. Figure that:Phisher wrote:Scott both are being plumbed with 1" in 3/4" out. I am concerned about the noise all around. I'm planning to use dimmer switchs in my fans to reduce noise, I think the pump noise is alot on how you mount them so I will need to come up with something creative there.
Joe
110chadman wrote:go to a local harware store and find some thick rubber or even those thick mouse pads i have an old one that i will cut up and put under my pumps cus i know the vibration will be a little loud
look around for a mouse pad at least 1/4 in thick
chad
what do you mean!!!!!snoopdog wrote:110chadman wrote:go to a local harware store and find some thick rubber or even those thick mouse pads i have an old one that i will cut up and put under my pumps cus i know the vibration will be a little loud
look around for a mouse pad at least 1/4 in thick
chad
Nooooo !!! Not the mousepad.